USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 1.2
8
Panel
window will appear.
2.
Move mouse and double-click the right button on
Network and Dial-up Connections
icon. Move mouse and double-click the
Local Area Connection
icon. The
Local Area
Connection
window will appear. Click
Properties
button in the
Local Area
Connection
window.
3.
Check the installed list of
Network Components
. If TCP/IP is not installed, click the
Add
button to install it; otherwise go to step 6.
4.
Select
Protocol
in the
Network Component Type
dialog box and click
Add
button.
5.
Select
TCP/IP
in
Microsoft
of
Select Network Protocol
dialog box then click OK
button to install the TCP/IP protocol, it may need the Microsoft Windows CD to
complete the installation. Close and go back to
Network
dialog box after the TCP/IP
installation.
6.
Select
TCP/IP
and click the
properties
button on the
Network
dialog box.
7.
Select
Specify an IP address
and type in values as following example.
IP Address:
192.168.1.1
, any IP address within 192.168.1.1 to 192.168.1.253 is
good to connect the Wireless LAN Access Point.
IP Subnet Mask:
255.255.255.0
8.
Click OK to completes the IP parameters setting.
For OS of Microsoft Windows NT:
1.
Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control
Panel
window will appear.
2.
Move mouse and double-click the right button on
Network
icon. The
Network
window will appear. Click
Protocol
tab from the
Network
window.
3.
Check the installed list of
Network Protocol
window. If TCP/IP is not installed, click
the
Add
button to install it; otherwise go to step 6.
4.
Select
Protocol
in the
Network Component Type
dialog box and click
Add
button.
5.
Select
TCP/IP
in
Microsoft
of
Select Network Protocol
dialog box then click OK
button to install the TCP/IP protocol, it may need the Microsoft Windows CD to
complete the installation. Close and go back to
Network
dialog box after the TCP/IP
installation.
6.
Select
TCP/IP
and click the
properties
button on the
Network
dialog box.
7.
Select
Specify an IP address
and type in values as following example.
IP Address:
192.168.1.1
, any IP address within 192.168.1.1 to 192.168.1.253 is
good to connect the Wireless LAN Access Point.
IP Subnet Mask:
255.255.255.0
8.
Click OK to complete the IP parameters setting.
Содержание MWA-6212U
Страница 1: ...User s Manual Version 1 2 Wireless LAN Broadband Router ...
Страница 46: ...USER S MANUAL OF WLAN BROADBAND ROUTER Version 1 2 38 III PPPoE Screen snapshot WAN Interface Setup PPPoE ...
Страница 55: ...USER S MANUAL OF WLAN BROADBAND ROUTER Version 1 2 47 previous configuration setting VI USB3G ...
