2
ADM-8400GT | REV. 12/07/2021
Clean the inline filter behind
the quick connect fitting on
the solution hose (#21 in the
diagram below).
When there’s a noticeable
loss of solution flow.
Wipe the tool down with a
damp cloth.
As often as needed.
5 - Useful Tips
Rinsing out inside the tool.
If there’s a buildup of dirt inside the tool that can’t be removed
by running clean water through it, remove the clear window in
order to clean out the inside of the tool. When done, re-attach
the window.
Cutting off solution flow.
Fine-tuning of the solution flow can be done with the flow
control knob on top of the tool. You can also completely shut
off flow by turning the same knob all the way clockwise.
Switching between hose cuffs.
To remove a hose cuff from the hose, twist the cuff clockwise
until it comes off. Twist a new cuff all the way on using a
counter clockwise motion.
