9
numbers.
USING TONE SERVICES ON A PULSE LINE
If you have pulse service, you can still use special services that require tone signals, such as bank-by-phone, by following
these steps.
1. Be sure
T/P
is set to
P
2. Dial the service's main number.
3. When the service answers, press
or press
#
, any additional numbers you dial are sent as tone signals.
4. After you complete the call and hang up, the phone resets to pulse dialing.
PROGRAMMING THE EMERGENCY BUTTONS
3 emergency numbers are provided as one touch speed dial and can be stored. To save precious time in an emergency,
store the numbers of your local police, fire department and EMS services on the Emergency Speed-Dial buttons, so that
you can automatically dial them.
1. Program these numbers by pressing the
STORE
button, then the
Emergency
button.
2. Enter the phone number you wish to assign to the emergency button.
3. Press
STORE
twice.
4. Repeat in turn for each emergency service.
Note:
To call any of your three local emergency services, simply lift the handset or press the Speaker button. Press the
corresponding speed-dial button.
REMOTE CONTROL FEATURES
SET ALARM NUMBER
You have 10 alarm number can be set. Please set alarm number first before you use the remote control features.
1. Repeatedly press
MENU
until “
SET ALARM NO
“ appears.
2. Press
OK
button, the display shows “
ALARM NO-01
“
3. Enter the phone number you wish to assign to the ALARM NO-01
4. Press
OK
to complete the setting and go to next number setting
5. Press
MENU
to complete the setting, or press
MODE
to complete the setting and return to standby mode, or you can do
nothing and wait for 15 seconds to complete the setting and return to standby mode.
SET PAGER
You can use 3 pagers at the same telephone. But you must register the pager’s code with telephone first before you use
the remote control features.
1. Repeatedly press
MENU
until beeps once and “
SET PAGER-1
“ “-----------“appears.
2. Press any key on the pager until the display shows a set of numbers and beeps twice for the corresponding numbers.
3. Press
OK
or
MENU
to complete the setting and go to next pager setting
4. Press
OK
or
MENU
to complete the setting, or press
MODE
to complete the setting and return to standby mode, or you
can do nothing and wait for 15 seconds to complete the setting and return to standby mode.
RECORDING/PLAYING EMERGENCY MESSAGE
NOTES:
1. You must record an emergency message in the phone. The message content is like “This is an emergency notification,
your assistance is needed. After the tone, please press pound (#) and 1 to speak or press pound(#) and 2 to
confirm your help."
2. You can record new emergency message to change the old emergency message. The message can last for up to 20
seconds.
RECORDING:
1. Press
REC./PLAY
for 2 seconds on standby mode.
The unit will emit a long beep and the display shows “
RECORDING
“.
After the beep the display shows
“
00-20
“ to start recording.
2. Speak in a normal voice about 8 inches away from the microphone. The display will show “
PLAYBACK
“ after 20
seconds and it automatically plays back the message
3. Or you can press
REC./PLAY
to finish recording for the recording time less than 20 seconds and it automatically plays
back the message.
NOTES:
1. Follow step 1-2 to change the emergency message.
