1.0 General Information
2.0 Description
G
This MYSON HI-LINE RC E unit is designed for wall-mounted
installation with a maximum installation height of 2.13m to
the underside of the unit.
G
The unit should be mounted with the air outlet downward.
1.
Top cover
2.
Air inlet
3.
Air outlet
4.
Vane
5.
Base
6.
Control panel
3.0 Electrical Supply
G
The unit is supplied with a 1.5m cord.
G
A fused (10A) electrical spur with a switch having 3mm
separation on all poles must be provided in an easily
accessible position adjacent to the unit.
G
Do not energize the electrical supply until the installation is
complete.
This unit must not be installed immediately below
a socket outlet.
This unit is not suitable for use in bathrooms or
other similar high humidity areas.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or a
similarly qualified person, in order to avoid a
hazard.
Type
Specification
Voltage
Frequency
Power
HI-LINE RC E
Remote Control
220V - 240V
50HZ
2000W
Warning: This appliance must be earthed.
The electrical installation must comply with local or national regulations.
G
Drill and plug two holes on the wall suitable for no.8 x 1.5"
screws in a suitable location.
G
The minimum distance from either fixing point to a corner
is 100mm.
G
The minimum distance above unit is 50mm.
G
Fix the two screws leaving them approximately 10mm proud
of the wall.
G
Hang the unit on the wall.
G
Make the electrical connection to the fused spur.
4.0 Fitting the Appliance
2310mm MAX
570mm
25mm
HI-LINE RC E
1
2
6
3
5
4
Height
Width
Depth
Unit Dimensions (mm)
205
615
130
