2
CONTENTS
•
Introduction
2
•
Installation and Safety
2
•
Accessories
2
•
Setting up your Amplifier
3
Rear panel connections
•
Operating your Amplifier
5
Front panel controls
•
Loudspeaker Output Protection and Muting
6
•
Remote Control Handset Operation
6
•
System Operation with Smart My-Link
7
•
Installing and Replacing Batteries
7
•
Trouble-shooting guide
7
•
Specifications
7
INTRODUCTION
The Myryad Z142 Integrated Amplifier has been designed to offer
a combination of high quality sound reproduction and elegant
styling. The Z142 can accept up to six line-level input sources,
including two tape recorders. Outputs are provided for one pair of
loudspeakers, for headphones and for an auxiliary power
amplifier. All functions – input selection, volume and standby –
can be operated using the infra-red remote control handset
supplied.
The Z142 offers a range of expansion possibilities:
• The Smart My-Link® input can be connected to a Myryad CD
player and Tuner – for example - which will automatically be
switched on or off when the Z142 is switched on or off.
• The Smart My-Link® input/output can be coupled to other
Myryad products that can then be remote-controlled via the
Z142's infra-red receiver - or vice-versa.
• When linked via the Smart My-Link® to other Z-Series products
or other compatible Myryad products, a number of extra features
become available which make the system as a whole easier and
quicker to operate.
INSTALLATION AND SAFETY
The Z142 generates a modest amount of heat and requires
ventilation. Do not place it on a rug or other soft surface into
which it could sink, obstructing the air inlets in its underside. Do
not allow any obstruction to the ventilation slots in the top cover. If
a number of Z-Series units are stacked on top of one another, the
Z142 should be placed on top. The Z142 should not be installed
in a built-in situation such as a bookcase or rack unless proper
ventilation is provided.
CAUTION: THIS APPARATUS MUST NOT BE EXPOSED TO
DRIPPING OR SPLASHING. OBJECTS FILLED WITH LIQUIDS
SUCH AS VASES MUST NOT BE PLACED ON THE
APPARATUS.
THE REAR PANEL POWER SWITCH DISCONNECTS MAINS
LIVE ONLY. THE POWER CORD MUST BE DISCONNECTED
FROM THE REAR OF THE APPARATUS, OR THE WALL
SOCKET, TO PROVIDE TOTAL ISOLATION. ONE OR OTHER
OF THESE CONNECTIONS MUST BE READILY ACCESSIBLE
WHEN THE APPARATUS IS IN USE.
Do not remove the cover, or attempt to modify or repair any item
yourself. Refer all servicing to a qualified technician.
ACCESSORIES
Your Z142 is supplied with the following accessories.
• Separate mains power cord to suit country of sale.
• My-Link interconnect (0.5m RCA-RCA).
• MSR2 remote control handset.
• MSR2 System Remote Control Owner’s Manual
• Two AAA batteries for handset (not in some countries).
