2
Introduction
The Myryad MI 240 Stereo Integrated Amplifier has been designed to deliver a combination of high quality sound
reproduction and elegant styling.
The amplifier can accept up to eight line-level input sources, including two tape recorders. Outputs are provided for one
pair of loudspeakers and for headphones. All functions can be operated using the infra-red remote control handset
supplied. This remote can also control Myryad CD players and Tuners and up to six other products – either using its
built-in code library or by “learning” from another remote.
The MI 240 offers a range of expansion possibilities:
•
The AUX. input can be converted to accept the output from a phono cartridge by installing a Myryad Phono Cartridge
Preamp Module (either MM for Moving Magnet or “high-output” moving coils, or MC for “low-output” moving coils).
•
A low-level "Bi-amp" output is provided to feed the Myryad MA 240 Power Amplifier, allowing bi-amplified drive of
suitable loudspeakers.
•
The My-Link input/output can be coupled to other Myryad products which can then be remote-controlled via the MI-
240's infra-red receiver or vice-versa.
•
When linked via the "Smart My-Link" to other compatible Myryad M-Series or Cameo products a number of other
features become available which make the system as a whole easier and quicker to operate.
Accessories
- Your MI 240 is supplied complete with the following accessories:
•
Separate mains power cord to suit country of sale.
•
Myryad Audio-Video Learning Remote Control Handset.
•
Four AAA batteries for handset.
•
Home Theater Master SL-9000 Operating Manual.
Safety and installation notes
This amplifier generates a modest amount of heat and thus requires ventilation. Do not place it on a rug or other soft
surface into which it could sink, obstructing the air inlets in its underside. Do not allow papers or cloth to obstruct the
ventilation grille in the top cover. The amplifier should not be installed in a built-in situation such as a bookcase or rack
unless proper ventilation is provided
CAUTION:
To prevent a fire or shock hazard, do not permit this product to become wet. If liquid is accidentally
spilled on it, immediately shut off its power at the wall socket and unplug the AC power cord. Allow sufficient time for
complete evaporation to occur before operating the amplifier again. If the liquid is anything but water and/or alcohol, a
qualified service technician should examine the amplifier before it is used again.
Do not remove the cover, or attempt to modify or repair the amplifier yourself. Refer all servicing to a qualified
technician.
