Myryad MDP 500 Скачать руководство пользователя страница 4

Страница: 4 / 6

Cine EQ button

When the CINE EQ button is pressed Cinema
Equalisation will be switched on and the
text CEQ will appear in the front panel
display and the On Screen Display status
screen. Press again to switch CINE EQ off.

The sound tracks on movies often sound
rather bright because they have been
balanced to take into account the acoustics
of typical cinemas (movie theatres). Myryad’s
Cinema Equalisation has been carefully
designed to compensate for this brightness
without impairing treble sound quality.

NOTE: CINE EQ IS NOT AVAILABLE WHEN THE
UNIT IS SET TO A MUSIC MODE.

Channel input

7.1

button

The 7.1 CHANNEL INPUT in the MDP 500
provides compatibility with future multi-
channel formats. Pressing this button
provides instant access to select the 7.1
CHANNEL INPUT. It may be deselected by
changing the source using the SOURCE
SELECT buttons, or by pressing the 7.1
CHANNEL INPUT button. In the latter case
the MDP 500 will return to the input
previously selected before the 7.1 CHANNEL
button was pressed. In each case the
similarly named buttons on the remote
control work in exactly the same way
(SRCE+, SRCE – and 7.1 CH).

remote control

handset operation

The MDP 500 is supplied with the Myryad
Audio-Video Learning Remote Control
handset. It will control not only your
MDP 500, but also any Myryad CD player
or FM tuner.

The Myryad Audio-Video Learning Remote
Control handset is a very powerful and
flexible remote. Apart from controlling
Myryad products it can also control up to 6
further products (e.g. DVD, VCR, TV,
Set-Top box etc.) – either by calling up pre-
programmed code sets which are already
stored in the handset, or by “teaching” the
Myryad handset from your existing remote.

The Myryad Audio-Video Learning Remote
Control handset is custom-made for Myryad
by Universal Remote Control Inc.. Fully
detailed instructions for the programming
and operation of the remote are in the
“Home Theater Master SL-9000 Operating
Manual” supplied with the MDP 500.

To control Myryad products the handset
must be set to AUDIO or CD mode by
pressing either the AUD or CD button at
the top of the handset. AUDIO mode is

used for operating the MDP 500, or any
Myryad integrated amplifier or preamplifier
and Myryad FM tuners. CD mode is used
for operating any Myryad CD player.

Remote operation of the MDP

500

and Myryad amplifiers and FM tuners
(audio mode)

The remote control keys are listed in order,
from left to right and from the top of the
handset down. The top eight keys (AUD,
CD, DVD, AUX, SAT, TV, VCR, CBL) set the
operating mode of the handset. To control
the MDP 500 first press the AUD key to
switch to AUDIO mode. In this mode the
remote will also control Myryad FM tuners
and operates exactly as described in your
Myryad tuner Owner’s Manual.

Power

This key operates in exactly the same way
as the STANDBY button on the front panel.
It sends the command to switch the
MDP 500, or any other Myryad preamplifier
or integrated amplifier, into or out of
standby mode.

Vol

and

Pressing one of the VOLUME

keys

will increase or decrease volume setting
– in exactly the same way as rotating the front
panel volume control. If the preamplifier is

Mode

Signal Type

Processing

Output from speakers

Stereo

………………………………………………………………………Dolby Digital 5.1…………………………………not applicable ………………………………not applicable

………………………………………………………………………………Dolby Digital 2/0………………………………………………Stereo…………………………………………………L,R

……………………………Dolby Digital 2/0, Pro logic flag on in the bitstream…………………………………………………………………………………………………………………
………………………………………………………………………………………………DTS 3/2 …………………………………not applicable ………………………………not applicable
……………………………………………………………………………………………………PCM………………………………………………Stereo …………………………………………………L,R

…………………………………………………………………………………Analogue signal………………………………………………Stereo …………………………………………………L,R

Mono

………………………………………………………………………………Dolby Digital 2/0…………………………………not applicable ………………………………not applicable

…………………………Dolby Digital 2/0, Pro Logic flag on in the bitstream…………………………………not applicable ………………………………not applicable

………………………………………………………………………………………………DTS 3/2…………………………………not applicable ………………………………not applicable
……………………………………………………………………………………………………PCM………………………………………………Mono……………………………………………………C

…………………………………………………………………………………Analogue signal………………………………………………Mono……………………………………………………C

Pro Logic

…………………………………………………………………Dolby Digital 5.1…………………………………not applicable ………………………………not applicable

………………………………………………………………………………Dolby Digital 2/0………………………………Dolby Pro Logic……………………………………L,R,C,LS,RS

……………………………Dolby Digital2/0, Pro Logic flag on in the bitstream………………………………Dolby Pro Logic……………………………………L,R,C,LS,RS
………………………………………………………………………………………………DTS 3/2…………………………………not applicable ………………………………not applicable
……………………………………………………………………………………………………PCM………………………………Dolby Pro Logic……………………………………L,R,C,LS,RS

…………………………………………………………………………………Analogue signal………………………………Dolby Pro Logic……………………………………L,R,C,LS,RS

Music modes:
(natural, concert, club and party)

………………………………Dolby Digital 5.1…………………………………not applicable ………………………………not applicable

……………………………Dolby Digital 2/0, Pro Logic flag on in the bitstream…………………………………not applicable ………………………………not applicable
………………………………………………………………………………………………DTS 3/2…………………………………not applicable ………………………………not applicable
……………………………………………………………………………………………………PCM……………………………………Music mode……………………………………L,R,C,LS,RS

…………………………………………………………………………………Analogue signal……………………………………Music mode……………………………………L,R,C,LS,RS

in mute mode (after pressing MUTE on the
R/C handset) then pressing the VOLUME

key will automatically disengage mute

mode and re-connect the signal to the power
amplifier and loudspeakers. This prevents an
excessively high volume level from being set
by mistake.

and

, tuner functions

These keys operate in a similar way to the
rotary tuning knob on the MT 100 and
exactly as the front panel TUNE UP/DOWN
keys on other Myryad tuners. A single brief
key press will move either up or down in
frequency or preset number or initiate
SEARCH mode. In MANUAL and PRESET
modes, when a key is pressed and held
down the tuner will scan automatically in
the desired direction.

Mute

Pressing the MUTE key on the handset
will engage mute mode and the MDP 500’s
line outputs will be muted. MUTE is a
"toggle" function, so pressing the key again
will disengage the mute mode. The mute
is also disengaged when the volume setting
is increased using the VOL

on the

remote control.

T/V, tuner function

This key sends the tuner STANDBY command
and will switch the Myryad MT 100 (and any
other Myryad tuner with a standby mode)
into or out of standby mode.

Menu

When this key is pressed the unit goes to
setup mode. The up/down/left/right keys are
used to navigate the menus (see below). The
unit escapes setup mode by either selecting
“EXIT” from the OSD (or VFD) or by pressing
MENU key again.

Guide

Pressing this key once displays the status
of the unit on the OSD. The status display
shows selected source, audio and video
signal type, audio output type and volume
information. The status display disappears
after 5 seconds or by pressing the same
key again.

NOTE: THERE WILL BE NO STATUS
INFORMATION IF “TEMP. DISPLAY – OFF” IS
SELECTED FROM THE OSD SETUP MENU AND
ONLY VOLUME INFORMATION IF “TEMP.
DISPLAY – SIMPLE” IS SELECTED FROM THE
OSD SETUP MENU

Exit

This key exits the setup mode without saving
the new settings. This is used if the setup
menu is adjusted by accident.

PRE. CH

This key has no function when the remote is
in “AUDIO” mode.

SEL

This is the “enter” key in setup mode.
Pressing once memorises the changes that
have been made in setup mode.

These keys are used to navigate in the menu.
Up and down keys are used to select the
parameter to be adjusted and the left / right
keys are used to adjust the parameter selected
with the up / down keys. The selected
parameter is shown in the OSD with different
colour and in the bottom row of the front
panel display.

SAT, AUX

, AUX

, DVD, TV, VCR,

tuner and CD (also marked

1, 2, 3,

4, 5, 6, 7, 8

and

All sources can be accessed from these keys
directly. For example pressing DVD selects
DVD audio and video signals that are then
processed and fed to the appropriate outputs
for viewing and listening.

7.1

CH (also marked

+ 10

)

The 7.1CH key operates in exactly the same
way as the 7.1 CHANNEL button on the front
panel. It provides instant access to select the
7.1 CHANNEL INPUT, which is deselected
when the source is changed using either the
remote or the front panel SOURCE SELECT
buttons or by pressing the 7.1 CH key again.

Tape (also marked

)

When you press the TAPE MONITOR key you
can hear the output signal from a recording
device connected to the TAPE PLAY sockets
on the rear panel. This is a "toggle" function
key: You press it once to engage and press
again to disengage. The TAPE MONITOR
input also disengages if a new source is
selected either from the remote or front
panel. Pressing the TAPE key has no effect
on the other source select keys.

Preset, manual and search,
tuner functions (also marked FAV,
info and next)

FM tuner Tune Mode keys. These operate
exactly as the FM tunerís front panel buttons.

E-bass (also marked enter)

This key switches on and off E-Bass mode.
In E-Bass mode, bass signals are sent to both
the main loudspeakers and to the subwoofer
channel, thus allowing greater bass output
when full range main loudspeakers
are employed.

Test (also marked ALT)

This key switches on the Noise Test signal,
after the LEVEL key has been pressed or the
level setup entered from the setup menu. A
broadband noise signal is sent first to the Left
Front channel for a few seconds, then to the
Centre channel and so on through the other
channels. The level TRIM keys may be used to
adjust the level of any channel during this
cycle (see below). While the level is being
trimmed the noise signal will remain directed
to that channel, and only move on to the
next after the trimming has been completed.

Comp

This key activates Dolby Late Night function
that compresses a Dolby Digital soundtrack
so that all details are audible even at low
listening levels, but loud sounds are reduced
in volume. Note: this function is only
available with Dolby Digital sources.

Cine EQ

This key switches on and off the Cinema
Equalisation function. It operates in exactly
the same way as the front panel CINE
EQ button.

SRCE + and –

These keys function in exactly the same
way as the front panel SOURCE

and

buttons.

Mode + and –

These keys function in exactly the same
way as the front panel MODE button, but
allow selection up and down through the
available modes.

TRIM + and –

These keys are for trimming speaker levels
in LEVEL mode or speaker delays in DELAY
mode. first press LEVEL (or DELAY) and then
trim using these keys. If LEVEL (or DELAY)
has not been pressed the keys function as the
Subwoofer level trims.

Level

This key switches on LEVEL Trim mode and
will cycle though the channels for trimming
levels. The key is pressed once to enter level
setup mode and select the Left Front channel.

English MDP 500 ok 29/1/01 10:14 am Page 6