
ROPE INNOVATION CO., LTD.
CONFIDENTIAL NO.
:
ROPE-15121802
Copyright © 2017 ROPE INNOVATION CO., LTD. All rights reserved. Website:
7
3. Method of installation
3.1. Preparation before installation
3.1.1 Open the packing box to check whether the type of device is correct and whether the accessories are
included, or else please contact your distributor.
3.1.2 Choose SIM card: each device needs to insert a GSM SIM card.
Please refer to the distributor’s suggestions to choose the SIM card.
3.1.3 Installing SIM card into the tracker, open the device with screwdriver and put the SIM card into the
tracker (do not insert the SIM card backwards).
Note:
Power off before installing or removing the SIM card
The SIM card should have GPRS credit
Ensure the SIM card is able to send and receive SMS
3.2 Installation
The device installation is covert. Please refer installation to an auto electrical contractor.
NOTE:
3.2.1 To prevent theft of the device, it should be installed as covertly as possible. Covertly installation is
suggested.
3.2.2 Avoid placing the device close to higher power electrical devices, such as reversing radar, anti-theft
device or other vehicle communication equipment;
3.2.3 The device should be fixed into position with cable ties or wide double-side tape.
3.2.4 The device has built-in GSM antenna and GPS antenna. During installation, please make sure the
receiving side face is up, with no metal object above the device to interfere with GPS reception. The
following places are suggested for installation:
-shelter in the decorated board below the front windshield;
-shelter around the front instrument panel (non-metallic material face);
-in the decorated board below back windshield;
4. Web based tracking online activation
4.1 Open website
www.overseetracking.com
and login with the user & password that created by Rope
4.2 Click
Information Management
4.3 Click
Vehicle Tracker List
and you will see all your vehicles are listed there. Please note, to add more
devices, please contact your sales.
Please check the
Tracker Status
, if it is
Unactivated
, please click
Activate
. If it is
Activated
, please click
Edit
.