Myria MY2613, Руководство пользователя

Страница: 14 / 20

EN
MY2613 - User manual
14
FULL (indicator lamp of full charge): when adapter is used to charge the
battery, it means full charge when the indicator lamp is on.
11.1V BATTERY IN
: please carefully check the anode and cathode when
connecting and the applied connection line can not be smaller than 0.75
square milimeters. Attention shall also be paid to the firmness when
connecting it.
LINE IN
(external audio interface): it is used to connect the compatible audio
equipment such as DVC and computer.
USB interface (USB device interface): when MP3 function of USB device is
needed, insert the USB device with MP3 songs to the interface.
SD/MMC CARD
(interface of SD card and MMC card): insert SD card or
MCC card with copied MP3 songs to the interface.
Key: pressing the key to switch pause status under playing status or vice
versa.
Stop key: pressing the key to stop playing under playing status; you are
suggested to stop the key and change USB device when you want to change
USB device.
MP3/LINE-MODE
(audio input switch): it is used to switch to use the external
audio or built-in MP3 encoding sound as the signal source of audio amplifier.
VOL-key
: select the previous song for playing: the volume will be
reduced by pressing the key for longer than 3 seconds.
VOL+ key
: select the next song for playing: the volume will be increased
by pressing the key for longer than 3 seconds.
REPEAT
(repetitive playing): press the key for repeating of single song or total
songs.
Key: pressing the key 1second: voice prompt ON, pressing the key 1
second again: voice prompt OFF
Key: pressing the key 1second: microphone priority ON, pressing the
key1 second again: microphone priority OFF.
Operation of FM receiving function
SCAN
key-pressing: press the key and the radio will scan the local radio
station and save it automatically.
CH+
key-pressing: press the key and the radio will read the saved radio
station and select the next one in ascending order;
CH-
key-pressing: press the key and the radio will read the saved radio
station and select the previous one in descending order;
Note:
MODE key is used to switch radio status in order to use radio key-
pressing function; if the receiving frequency needs inputting manually, press
the numbers on remote control directly to input the frequency of radio station.
PAIRING BLUETOOTH DEVICE
1. Turn Bluetooth mode on (after will power up the device please press Mode