Admin Setup
11
•
•
•
•
•
Number of ID cards per user__ for a given period__
- Set a limit for the
number of ID cards a user can dispense, for a given time period (select the time
period from the list).
Inactivity logout time
- Set the inactivity logout time, in seconds.
Allow users to register their card
- If enabled (
On
), users will be able to
register their ID card.
System language
- Select the system language for the MyQ Recharge
Terminal.
Displayed type of supported coins and bank notes
- Enter the information
about the supported coins and bank notes, that will be displayed during the
user sessions.
After setting the options, tap
Save
at the bottom of the screen.
4.4.4 Devices tab
On the
Devices
tab, you can enable or disable the optional hardware of the MyQ
Recharge Terminal.
You can also set the
COM Ports
of the additional hardware devices according to the
COM port values found in
Start
→
Control Panel
→
Device Manager
→
Ports
.
In the last two fields,
Coin acceptor currency code
and
Bill reader currency code
,
you can set the currency of the specific hardware.
After setting the options, tap
Save
at the bottom of the screen.
The
Coin acceptor currency code
and
Bill reader currency code
values are
linked to the hardware's firmware. Be sure to set the currency on your MyQ
server in accordance to this two fields. The currency setting of the MyQ server is
used in reports and is displayed during the user sessions.
4.4.5 Receipt tab
On the
Receipt
tab, you can configure the data to be displayed on the receipt.
