Handle the tray with care, do not apply to much pressure. SIM card should be correctly
placed on the tray (as shown in the figure).
Memory card assembly
Use only memory cards that are compatybile and confirmed by myPhone. Uncompatybile
memory cards can damage the device or delete stored data. Make sure that the card type is
microSD and that card capacity do not excess 32GB. To install memory card:
Turn off the phone and pull out the microSD tray by inserting spike (supplied) into the
hole.
Place the memory card onto tray
Pull the tray inside
Handle the tray with care, do not apply to much pressure. Memory card should be
correctly placed on the tray (as shown in the figure).
Battery charging
Before the first use it is necessary to charge the battery. The battery should be charged with
supplied charger. Device features a battery having the capacity of 2000mAh. In case of any
problems with the battery or the need to replace it, please bring the device to nearest myPhone
service centre. Use only the chargers and cords authorized by myPhone. Using inauthentic
chargers and cords may cause the battery to blow up or damage the device. If the battery is
nearly discharged, device displays a notification of low battery charge. Charge battery to
continue using the device. Once the battery is completely discharged, please do not turn it on
even during charging. Charge the battery for several minutes before switching it on again. To
charge the battery proceed as follows:
1. Connect the micro-B USB plug (trapezoid) to appropriate socket in myPhone INFINITY
