myPhone Fun 2, Руководство пользователя

Страница: 2 / 9

Tech specification:
•
RAM Memory: 512 MB
•
4GB internal memory
• 1750mAh battery
•
input and output charger parameters: 100-240V AC,
50/60Hz, 150mA
-
output: 5V DC, 1000mA
•
Power the phone under standard conditions:
-
5V DC, 500mA
•
Smartphone`s weight: 219g netto/371g brutto
SIM card inserting
myPhone FUN2 is a mobile phone using
Dual SIM technology. Dual SIM allows you to use two mobile
networks at the same time. To insert the SIM card correctly follow
the instructions:
•
Turn off the phone, remove the back cover (undermining the
slot located in the left corner of the base of the phone with
your nail) and pull out the battery.
•
Insert the SIM card into the slot following the pictures from
above and below the socket.
MICRO SIM ADAPTERS
Do not install hollow (with no card) micro-SIM card adapter in your
smartphone. This will cause a jam. Attempt to draw jammed adapter
back from the slot can cause mechanical damage of the phone. If
SIM card adapter deadlocks in the socket, you should contact an
authorized myPhone service!
Memory card inserting
Use only memory cards compatible and approved by myPhone.
Incompatible memory card may damage itself and the device and
remove stored data. Incompatibility of memory card can be caused
by incorrect card format (micro SD format is required) or
unsupported card size (over 32GB). To insert the memory card