©
©
©
© 2015 myPhone. All rights reserved.
myPhone CUBE LTE
ENG
9
1. Before the first start
SIM card installation
myPhone FUN 4 is a mobile phone with Dual SIM technology, which allows you to use
two mobile networks simultaneously. First slot supports SIM or microSIM adapter, while
the second slot microSIM cards only. To insert the SIM card properly proceed as follows:
•
Turn off the phone, remove the back cover (undermine it with fingernail using a
slot designed for this purpose. It is located in the lower right corner of the phone)
and remove the battery.
•
Insert the SIM card into the slot according to the drawings underneath the seat.
Memory card installation
Use only memory cards compatible and approved by myPhone. Incompatible memory
cards may damage the device, the card itself and lead all data loss. Incompatibility of
memory card can be caused by incorrect card format (requires microSD format) or
unsupported card size (over 32GB). To properly insert a memory card proceed:
• Turn off the phone, remove the back cover (undermine it with fingernail using a slot
designed for this purpose. It is located in the lower right corner of the phone) and remove
the
battery.
• Insert the memory card into the slot according to the drawings underneath the seat.
Charging the battery
Before you turn on the phone for the first time the battery needs to be charged. Charge
the battery with charger included in the set. The capacity of battery is 1800 mAh. In case
of problems with battery - the device should be delivered to myPhone service center.
You should only use chargers and cables approved by myPhone. Unauthorized chargers
or cables can cause the battery explosion and damage your device. When the battery
becomes low, low battery indicator appears on display. To continue using the device,
recharge the battery. When the battery is completely discharged the phone can`t be
turned on even when loading is in progress. To turn it on again the battery needs to be
loaded for few minutes.
To charge the battery:
1. Connect micro-B USB (trapeze) into the appropriate slot in myPhone CUBE LTE.
Improper connection of charger (USB cable) can damage your phone or AC
adapter. Any damages caused by misuse are not covered by the warranty.
2. Connect the charger to an AC outlet. Once you start charging an animated charging
icon should appear on the phone screen.
The device may heat up while charging. This is normal and should not affect the
stability or performance.
3. When charging percentage on the display reaches 100, it will mean that the battery is
full and you should finish loading.
