myontec MBODY, Быстрое руководство

Страница: 11 / 16

10 11
1 What do I do with the push
button on MCell?
By pressing the push button shortly
you are able to
– wake up the MCell to idle state,
– add lap marks to exercise data,
and by pressing 3 continuous sec. you
are able to
– start & stop the recording without
the smart phone (MCell attached to
the shorts).
2 When I try to start the
exercise with the Live app,
the measurement won’t start.
While connecting, the LED of
the MCell blinks wildly for a
moment.
The battery of the MCell is most likely
empty. Try to recharge the battery.
T I P S & T R O U B L E S H O O T I N G
3 I am unable to pair the
MCell with the Mbody Live
app. I cannot find the device by
discovering it in the settings.
Make sure that the MCell is charged
and that it is in idle state (the LED
blinks once in every three seconds)
before discovering. Also make sure
that your phone supports Bluetooth
Smart or 4.0 and that your Bluetooth is
switched on in your phone.
4 As I start the exercise, the
MA/min values are very high.
What is causing this?
Make sure that you have moistened
the sensors in the shorts thoroughly
before starting. Poor connection to the
skin can cause abnormal values.
5 I recorded an exercise
to the memory of the MCell
and later transferred it to
Movescount with Mbody Link.
Now I cannot find the exercise
from Movescount even if the
transfer was succesful?
The real-time clock resets if the battery
of the device is fully exhausted and
device is not connected to Mbody Live
or Link after recharging.
If the real-time clock of the MCell is
reseted before the start of the exercise,
the date and time of the exercise is
wrong. Try searching the Movescount
from date 1.1.2015.