myomo MyoPro Motion E, Быстрые руководства пользователя, Страница: 10 / 13

MyoPro Quick Start Guide: Troubleshooting
Myomo Inc. | One Broadway 14
th
Floor | Cambridge, MA 02142
TEL: 877.736.9666 www.myomo.com PN: 27533 Rev: 001
If the solutions presented here do not fix your problem, please call Myomo Support: (617) 651 - 0226 or (877) 736 - 9666
Problem Solution
Issues with the fit of the MyoPro on the arm:

Fingers falling out of the saddle

MyoPro sliding down the arm

Discomfort/pressure points
Make sure the MyoPro has been donned correctly and all joints are
aligned and cuffs/straps are snug. Refer to Quick Start donning guides
and user manual for detailed instructions.
Hand and hand strap routing:
Elbow:
Elbow aligned with MyoPro axis
Harness:
Poor
Good
Contact your O&P provider or your Myomo Regional Manager to
address discomfort and any necessary modifications
Jerky or erratic movements

Check the fit of the MyoPro on the arm . If the cuffs and straps
are too loose, the sensors will lose contact with the skin,
causing erratic motion.

Jerky motion is common at the start of the training program,
especially when practicing muscle relaxation. Consistent
practice of proficiency drills and working with a therapist can
improve this.

Sensitivity is set too high . Settings in MyConfig may need to
be adjusted by the therapist/Myomo Regional Manager/ O&P
provider.