HOW TO DON A HARNESS
1) Stabilize the harness saddle
in the middle of your shoulder.
2) Secure the cross-body strap to the saddle.
TIP: Abduct the shoulder with
the MyoPro 2+ (lifting it to the
side), or use furniture to help lift
while pulling the
finger adjust
loop
to tension. When your arm
returns to your torso, you should
feel the tension of the harness
saddle on your shoulder,
indicating the MyoPro 2+ is
suspended from your shoulder
girdle, not your shoulder joint.
4) Secure cross body strap.
5) Harness Donning complete
CROSS-BODY HARNESS
11
Anterior View
PREPARATION:
Don your MyoPro 2+ first. Follow instructions for the harness provided
to you. For detailed instructions, refer to User Manual and donning instructions
Grab the
cross-body strap
behind your
back and pull it underneath your
armpit on the side opposite the
MyoPro 2+.
Secure the
cross-body strap
using the
release tab
. The
saddle
should lay flat
against your body. Adjust the angle of
the fastened
release tab
to make the
saddle
sit evenly and comfortably.
There should be slack in the
finger
adjust loop
at this point.
Make minor adjustments to the
finger
adjust loop
tension until a good
balance is reached between
suspension and comfort. The Velcro
will secure your tension
Place the harness
saddle
on your shoulder. The
suspension straps
should straddle your shoulder. The
middle of the saddle should be at the midline of the
shoulder, touching neither the neck or shoulder joint.
You may have to lift your arm out to the side in order to
move the saddle into the correct position.
28441 Rev 001
Содержание myopro 2 Plus Motion W
Страница 1: ...MyoPro 2 Quick Start Guide 1 28441 Rev 001...
