myomo myopro 2+ Motion G, Руководство пользователя, Страница: 21 / 49

PN 28010 Rev 001 21
6. If your hand is tight, you will have to uncurl your fingers to pull the hand sufficiently into the hand shell.
7. Position your hand so the base of the thumb is in full contact with the hand shell . Everything is aligned in
comparison to the thumb being fully seated against the hand shell. The majority of fit issues occur here .
8. Secure the hand strap hook to the hand strap anchor . The hand should be locked in place and unable to
remove without releasing the hand strap anchor. If the hand can slip out, tighten the palmar hand strap
and/or dorsal hand strap as necessary.
⚠
FIT CHECK
⚠
CONFIRM THE HAND SHELL PLASTIC IS
AGAINST THE THUMB WEB SPACE AND THAT
THE KNUCKLES ARE PAST THE PALMAR
CREASE. MAKING CHANGES TO THE FIT OF
THE HAND PAST THIS POINT IS IMPOSSIBLE
WITHOUT REMOVING THE BRACE AND
STARTING OVER. THE HAND SHOULD BE
LOCKED IN THE CORRECT POSITION AT THIS
POINT.
6 Uncurling the fingers over the hand shell 7 Pull the hand so the knuckles are past the plastic, the thumb web space is in contact
7 Connect the hand strap hook and anchor. Tighten the straps for a very secure fit.