MyMuvi FamilyCam HD, Руководство по эксплуатации

Страница: 26 / 27

24
Solving common problems
The battery has insufficient charge. Replace the batteries or
charge the lithium battery.
The camera does not
power up after the
battery is installed
The battery is installed incorrectly. Make sure the batteries
are installed per the diagram in the battery compartment.
The memory card is full. Transfer files from the memory
card, format the memory card and then take photos or
record video.
Camcorder will not
take photos or record
when the record or
shutter key is pressed
The SD card is locked. Remove the SD card and move the
protection switch to the unlocked position.
Photos are fuzzy
The camcorder was not held steady when recording. Hold
the camcorder with two hands or use a tripod.
Photos and videos are
“muddy”
There is insufficient light for proper exposure. For best
results be sure to take photos or videos in a well lit area,
The battery is drained. Either replace the alkaline batteries
or recharge the lithium battery. Camera Automatically
Powers Off
The camcorder has exceeded the time set in the automatic
power off menu.
Unable to delete the
files in the camcorder
The SD card is locked. Remove the SD card and move the
protection switch to the unlocked position.