Mylna sport BP210, Руководство пользователя

Страница: 12 / 15

8. Mounting the tension control
Attach the handle bar column (13) using the four hexagonal socket screws (3), four
washers (4), and four nuts (36). Turn the pedal resistance regulator (12) back and forth to
ensure that it moves easily. The resistance regulating cables (31, 33) must be removed
and the procedure repeated if this is not the case.
9. Mounting the handlebar post
Insert the pulse cable (6) through to the upper plate of the handle bar column (13)
while holding the handle bar (5) over the handle bar column (13). Attach the handle bar
(5) to the handle bar column (13) by screwing it onto the upper holes with the hexagonal
socket screws (3), washers (4) and nuts (36).
10. Mounting the computer
Slide the computer (10) onto the top of the handle bar column (13) and fasten using the
screws (11). Insert batteries into the battery compartment of the computer and close the
compartment. Check the functions of the computer (refer to ‘Using the Computer’).
Figure 7
12