Mylex PCI Disk Array Controller Drivers 08P4100, Инструкция по установке и эксплуатации

Страница: 32 / 100

Installing the Mylex Disk Array Controller into an Existing Windows NT 4.0 System
3-8 PCI Disk Array Controller Drivers Manual
7. In the Install Driver box, click Have Disk.
8. Insert the NT4/NW Drivers Software Kit diskette into the floppy disk
drive.
9. From the Install From Disk box, change the path to A:\NT4 as shown
in Figure 3-7 and click OK.
Figure 3-7. Change Path to A:\NT4
10. In the Install Driver box, select the appropriate Mylex Disk Array
Controller and click OK (Figure 3-8).
Figure 3-8. Select Mylex Driver for Windows NT 4.0