Mylex Mylex RAID EzAssist, Руководство пользователя, Страница: 240 / 290

How Do I Update Controller Firmware or the RAID EzAssist Utility?
5-6 RAID EzAssist User’s Manual
❑
Update the Selected Controller(s).
☞
After you’ve selected all controllers to update, press the Tab
key to select Ok, then press Enter.
The Flash Code Update warning is displayed (Figure 5-5).
Figure 5-5. Flash Code Update Warning
☞
To begin the update (flash) process, use the arrow key to
select Yes, then press Enter,
OR
☞
To cancel the update, press Enter with No selected.
If you selected Yes, the Flash Process Status screen is displayed (Figure 5-6).