Mylex MPE-PNTM, Руководство пользователя

Страница: 23 / 38

J24
ENABLES MOTHER-
BOARD TERMINATION
FOR SCSI BUS
(DEFAULT)
EXTERNAL TERMINATION
FOR SCSI BUS
Note: When one end of the SCSI cable is on the mother-
board, close Jumpers J23 and J24. When the mother-
board is not at the end of the SCSI cable, open Jumpers
J23 and J24.
Finishing Hardware Installation
Once the system board has been mounted and screwed
in place, install the video adapter and any other periph-
eral adapters into the board. Check each of the cables to
ensure they are properly installed.
The BIOS that is installed on the MPE--PNTM has a built-
-in CMOS setup program like many other BIOS available.
To access the setup screen, press the proper key at any
time when prompted during the POST. (Power On Self
Test)
Use the setup screen to configure the floppy drives, hard
drives, video display type, and other I/O options. For cur-
sor movement and other commands, follow the on--
screen prompts.
Please refer to the MPE--PNTM BIOS Manual for more
details.
Expansion Slots
There are seven EISA bus mastering slots where
EISA/ISA expansion cards can be plugged in. The slot
number 1, for both the PCI and EISA bus, is the slot near-
est to the motherboard power connector.
Copyright 1994 Version D02 2 - 11
Installation MPE-PNTM System Board