Mylex Global Array Manager, Руководство по установке и инструкция пользователя

Страница: 82 / 212

Running RAID Assist
4-24 GAM Client User’s Guide
Figure 4-22. Manual Configuration – Disk Arrays
Each disk array is represented by two lines in the Disk Arrays area of the
screen (upper left, Figure 4-22). Logical drives (if any have already been
configured) display on the right side.
Do the following:
1. Select an unused drive and drag it to the Disk Array A0 section. The
drive will be part of a disk array referred to as “A0.”
2. Select other unused drives and drag them to Disk Array A0, or click the
Add Array button to create a row for Disk Array A1 (then A2, A3,
etc.), then drag unused drives to A1 (or A2, A3, etc.) if you so desire.
☛
Note
Multiple drives can be added by holding down Ctrl
while clicking drives, then dragging the selected set to
a Disk Array section.
3. If you want to manually configure a hot spare, click an unused drive,
then click the Make Spare button. If you want a dedicated hot spare,
drag and drop the hot spare to the desired disk array.
4. If you want to start over, click the Clear All button and start again.