Mylex Global Array Manager, Руководство по установке и инструкция пользователя

Страница: 69 / 212

Configuration
Manual No. SA67-0049-01 4-11
minimal input and allow RAID Assist to set up an optimal
configuration automatically, or
• Click the Assisted Configuration button if you want RAID Assist to
lead you step-by-step through the configuration, or
• Click the
Manual Configuration
button if you want full control over
your configuration setup, or
• Click Cancel if you want to exit RAID Assist without any changes.
Automatic Configuration
Automatic Configuration provides three options:
•
New Configuration
. Sets up a new configuration on the controller,
deleting the previous configuration and data (if any).
• Add Logical Drive . Sets up additional arrays (logical drives) leaving
the existing array(s) intact. At least one array must be configured on
this controller, and unconfigured drive space must remain.
• Expand Array . Restripes data in your array across additional,
unconfigured drives to expand the capacity of the array.
For example, open New Configuration as shown in Figure 4-9.
Figure 4-9. Select “New Configuration”