Mylex FlashPoint BT-930, Руководство по установке и инструкция пользователя

Страница: 47 / 70

Adapter and Device Configuration
Manual No. 3000863 3-21
2. Select Continue to perform the device verification operation. Select
Cancel to cancel the operation and return to the Device Configuration
menu.
Performing a Low-Level Format of a Device
You can perform a low-level format of a device using the Format option from
the Device Configuration Menu.
1. Highlight Format and press <Enter>. The format confirmation dialog
box appears (Figure 3-19).
Figure 3-19. Device Formatting Confirmation
2. Select Continue to perform the formatting operation. Select Cancel to
cancel the operation and return to the Device Configuration menu.
,
WARNING
The device formatting operation erases any
information that may be stored on the disk drive.
Do not confirm this operation if there is any data
on the device that you do not wish to erase. Before
formatting, make sure that all necessary data is
backed up.
If you make any configuration changes before you leave the Device
Configuration window, AutoSCSI prompts you to confirm your changes.
When you select Yes, any configuration changes you may have made are
stored in the serial EEPROM. If you enter No, your changes are cancelled.