Mylex eXtremeRAID 1100, Руководство по установке

Страница: 12 / 74

Product Description
1-2 eXtremeRAID Installation Guide
Controller Features
Features of the DAC1164P controller include:
• Up to three Ultra2 SCSI channels that support RAID levels 0, 1, 3, 5,
0+1, 10, 30, and 50.
• Low-Voltage Differential (LVD) Wide Ultra2 SCSI (Fast 40).
Controller also supports SCSI 1, 2, or 3, single-ended.
• High performance RISC processor and 16MB, 32MB, or 64MB
SDRAM cache (with parity) on a full-length, 64-bit PCI version 2.1
standard card.
• Memory module (DMM1100) with memory, battery backup, and
circuitry for monitoring the battery condition.
• 1MB, 8-bit flash EEPROM for BIOS and code.
• Built-in configuration utilities (in BIOS).
• Supports controller redundancy using a shared SCSI bus in a clustering
configuration.
• PCI Hotplug capability allows the DAC1164P to be swapped with a
replacement without powering down the system.
m
Caution
Be sure the motherboard you are using supports PCI
Hotplug before attempting to use this feature, or
serious damage to the controller and/or the
motherboard could result.
Operating System Support
MS-DOS 5.x, 6.x, and above are supported using drivers that reside in the
eXtremeRAID BIOS. Many other popular operating systems are supported
using software drivers in the Disk Array Controller Software Kit that is
included with the DAC1164P controller (see the Disk Array Controller
Software Kit Installation Guide and User Manual – P/N 771929)