www.hygienesuppliesdirect.com
14
INSTALLING AND REMOVING
the BATTERY PACK
Please Note: Charge the battery pack before first use.
To install the battery pack in the tool:
1. Lock the trigger switch by placing the
forward/reverse switch into the centre
position.
2. Align the body with the groove in the
battery pack and push in the direction of
the arrow until the battery pack is secured
onto the paint sprayer.(Fig. 10)
To remove the battery pack from the tool:
1. Push the battery release button (13) and remove the battery pack in the
direction of the arrow.
Note: Always remove the battery pack from your paint sprayer and store
safely when you are assembling parts making adjustments cleaning or
when not in use.
CHARGING the BATTERY PACK
Note: Only charge up the battery in an ambient temperature of from 0°C
to 40 °C.
• Always check the charger and its connecting cable for damage before
putting them into operation. If you find any damage or wear do not use
and contact your place of purchase for repair or replacement.
• Only connect the charger to a properly installed plug socket that
matches the mains voltage indicated on the rating label of the charger.
• Make sure that the charger cable does not represent a trip hazard.
• Keep the charger which is connected to the mains power and the battery
block away from highly flammable materials (e.g. paper, textiles etc.).
Fig. 10
13
MYC1826L_Cordless Spray Gun_Manual 16/11/21 14:58 Page 14
