Mylaps X2 Driver ID, Быстрый старт

Страница: 5 / 6

SETTING THE NUMBER OF DRIVERS
X2 Driver ID
X2 Driver ID
X2 Driver ID
X2 Driver ID
Keep the button pressed until
the LED panel displays, ‘D’.
After displaying ‘D’ the LED panel
will return to a number.
Press and hold down the button
while powering up the X2 Driver ID.
The LED panel will briefly display ‘D’,
after which you will see a number.
Press the button to scroll through
2 - 5 (the number of drivers).
To set the number of drivers,
press and hold the button.
SPECIFICATIONS
Dimensions Complete
Driver Id module
(without cable)
60x60x30 mm / 2,4x2,4x1,4 inch
Dimensions PCB only 55x55x25 mm / 2,2x2,2x1 inch
Weight Complete
Driver ID module
80 gr / 0.176 lb
Weight PCB only 30 gr / 0.066 lb
Power 12V / 0,3A
CAN Bus CAN 2.0A compliant
Baudrate 1 mbit/s
CAN ID 0XA0
Connection 4 pin M8 sensor connector male
Pin 112V Brown
Pin 2 Can-L White
Pin 3 GND Blue
Pin 4 Can-H Black
Mounting bolt size M3
Environmental operating
temperature
- 60°C / 32 -140 °F
Environmental protection IP51
Number of drivers 2 - 5