Mylaps X2 Club, Руководство пользователя

Страница: 14 / 30

X2 transponder version 2018 © MYLAPS rights reserved
14
6. Installation and mounting
Your X2 Transponder needs to be registered, have a subscription and must be activated before you can use it.
Otherwise it will stop sending out its transponder number, and the subscription indicator light in the M8 Connector on the
X2 Transponder will flash red 5 times per second.
During a race, keep the direct power X2 RaceKey in its mount to ensure the X2 Transponder stays activated.
Make sure the X2 Transponder has a clear view to the track. Metal or carbon fiber underneath the transponder could block
the signal.
Do not attach the transponder near the engine or the exhaust due to heat and vibrations.
Do not attach the transponder near high current AC wiring and/or systems e.g. KERS or other electric motors, xenon lights.
Mounting direct power model
Insert the vibration rubbers and attachment pins correctly in the X2 Transponder mounting holes.
Mount the X2 Transponder in the car front wheel arch, or bike front forks, or kart lower chassis.
During a race, keep the direct power X2 RaceKey in its mount to ensure it stays activated.
For Direct Power transponders make sure you slide the X2 RaceKey into the RaceKey Mount before every race.
Make sure your transponder has a good and free sight to the track.