7
Ambient Light Adapter
•
Make sure the ambient light adapter being used includes the same pairing
number as that of the instrument being used.
•
Do not allow the ambient light adapter to become scratched or dirty.
•
Keep the ambient light adapter away from external light and dust when not
in use.
Power Source
•
When the instrument is not being used, turn the power switch OFF.
•
To charge the instrument, connect it to a computer using the USB cable.
System
•
Do not subject the instrument to strong vibrations or impacts. Doing so may
cause deterioration in performance or a malfunction.
•
The limiting aperture (measuring port) of this instrument is a particularly
precise component of the optical system. Do not allow the aperture to
become dirty or subject the aperture to impacts. When the instrument is not
in use, make sure to attach the calibration cap to protect the limiting
aperture (measuring port).
•
The instrument may cause interference if used near a television, radio,
transceivers, etc.
•
Communication with connected external devices may be interrupted if the
instrument is exposed to strong external static electricity. In such cases, turn
the power OFF and then ON again.
•
When turning the power OFF and then ON again, wait several seconds after
turning the power OFF before turning the power back ON.