MYD-Y7Z010/007S Development Board Hardware User Guide
MYIR Electronics Limited
|
www.myirtech.com
12
/
23
4.2.2 USB
1 Channel USB 2.0 high speed interface is implemented by using a USB PHY USB3320C on
baseboard, and the Port is J9.
4.2.3 CAN/RS232/RS485
1 CAN, 1 RS232, and 1 RS485 are routed out through DB9 J5.
4.2.4 Debug UART
1 Channel 3.3V UART Port J5 is used as debug serial port.
4.2.5 PressButton
1 PressButton is located on baseboard used for system reset.
4.2.6 JTAG
1 14Pins JTAG Port is used for PS/PL debug.
4.2.7 TF card
1 TF card is used for data storage and can be also used as boot device.
4.3 PL Interface
4.3.1 PL Ethernet
2 another ethernt ports are expanded from PL, can be used for real-time industrial ethernet
communication.
4.3.2 GPIO Port
1 50Pins GPIO Port is located on baseboard for customized applications..
