10
User Helper
11
Advanced Settings
If you are having trouble with the automatic set up, this
section has all of the questions you will need to ask the
person or service that set up your wireless connection.
The person may require your MAC address.
To find Ira’s MAC address:
1. Press “Menu” on the remote
2. select “System Settings”
3. select “Network”
4. select “View Settings”
Write down your MAC Address from Ira:
_ _ : _ _ : _ _ : _ _ : _ _ : _ _
Note
that MAC addresses use only numbers 0-9 and
only letters A, B, C, D, E, and F
Info you need about your home wireless Internet
connection if you are having trouble with the
automatic setup:
1. DHCP Enabled: YES
❒
NO
❒
2. SSID (a.k.a. Network Name): _________________
____________________________________________
a. Note the SSID needs to have the correct upper
or lower case letters
3. Authentication:
OPEN
❒
Pre-Shared Key
❒
WPA
❒
WPA2
❒
a. If Pre-Shared is it WPA? Yes
❒
NO
❒
b. If WPA what type: TKIP
❒
AES
❒
c. If WPA2 what type: TKIP
❒
AES
❒
NOTE: Firewall Information: Check the following ports
are open: UDP and TCP ports 80 and 123; DNS port 53.
Once you have this information you are ready to use Ira
by going to:
“System Settings”
“Network”
“Manual Settings”
“View Settings”
