MyGate PQ81S, Инструкция по эксплуатации

Страница: 10 / 20

8
Q81S_0 9 _2021
JP10
N.C.
JP4 JP5 JP6
N.C. N.C.
TR
AS
+
+AC
-AC
TX
+
-
RX
+AC -AC
24
12Vdc
24Vac
24Vdc
12Vdc
24Vdc
24Vca
N.C.
TR
AS
+
+AC
-AC
TX
+
-
RX
+AC -AC
24
12Vdc
24Vac
24Vdc
12Vdc
24Vdc
24Vca
N.C.
PROTECO S.r.l.
Via Neive, 77 - 12050 Castagnito (CN) ITALY Tel. +39 0173 210111 - Fax +39 0173 210199 info@proteco.net - www.proteco.net
3.7 SAFETY EDGE
3.7.1 Mechanical safety edge in CLOSING
Wire the safety edge to 23 - 24 , terminal JP10 .
• If the contact is broken during CLOSING , the
gate stops and reverses.
• If the contact is broken during OPENING , the
gate keeps on working normally
Mechanical safety edge + photocells in CLOSING
Wire the safety edge and the N.C. contact of the
photocell in series.
• If the contact is broken during CLOSING , the gate
stops and reverses.
• If the contact is broken during OPENING , the gate
keeps on working normally.
3.7.2 Mechanical safety edge in OPENING
Wire the safety edge to 6 – 9 , terminal JP5 .
• If the contact is broken during OPENING ,
he gate stops and reverses after 3 sec.
• If the contact is broken during CLOSING ,
the gate keeps on working normally.
Mechanical safety edge + photocells in OPENING
Wire the safety edge and the N.C. contact of t
he photocell in series.
• If the contact is broken during OPENING , the gate
stops and reverses after 3 sec.
• If the contact is broken during CLOSING , the gate
keeps on working normally.
N.B.: Before wiring any SAFETY STRIP in
CLOSING, remove the jumper
between terminal 23 and
terminal 24 .