6
Programming
The MYE Entertainment MWC2-8 receiver must be programmed to detect and
lock in the MYE Entertainment transmitters or other brands of transmitters listed
below. The receiver features both “auto” and “manual” program modes. In the
auto mode the MWC2-8 will automatically search for and program in your
transmitters. The manual mode provides the ability to add or erase a specific
transmitter channel or unwanted frequency caused by spurious emissions or
other local elements.
Auto Program Mode
1. Press Channel Down and Volume Up buttons simultaneously for three
seconds until “P-1” appears on the display.
2. Press the “Ch Up ” button to select one of the following program modes:
P-1 = MYE Entertainment 800MHz Transmitters
P-2 = Cardio Theater / Enercise XTV Transmitters
P-3 = Audeon 800MHz Transmitters
3. After selecting the Transmitter Mode, press the TV button to auto-scan
and lock transmitters.
4. Press the Channel Up or Channel Down buttons to determine all
transmitters have been locked in. NOTE: “PRESET” will appear in the
display when a transmitter channel is programmed.
5. To exit program mode press the EQ button. The display will blink briefly
and then default to first transmitter channel programmed.
Manual Program Mode (Add or Delete Frequencies)
1. Press Channel Down and Volume UP buttons simultaneously for three
seconds until “P-1” appears on the display.
2. Press the “Ch Up” button to select one of the following transmitter program
modes listed above.
3. Press the EQ button
4. Press CHANNEL UP/DOWN buttons to scroll through all transmitter
channels.
5. To add or delete a transmitter channel press the “TV” button. NOTE:
“PRESET” will appear in the display when a transmitter channel is
programmed.
6. To exit manual program mode press the EQ button. The display will blink
briefly and will default to first transmitter channel programmed.
