4
Programming the Audio Grabber
using the MAG-REMOTE
MAG-REMOTE
The Mye Audio Grabber can be used with MYE Entertainment transmitters as well as the other
compatible brand 863MHz or 915MHz transmitters. It uses the MAG-REMOTE to configure the
Audio Grabber for transmitter type and number of channels. You can also use the MWC5-PRG
Eclipse programmer.
The MWC5-PRG powered
by using the MYE
Entertainment 9-volt
battery cable. 9-volt / PP3
Battery - Not Included. It
can also be powered using
a MYE CSAFE cable
plugged directly into a
standard CSAFE port or
MYE 9 Volt AC
Adapter.(Sold separately)
MWC5-98 Programmer
1) Make sure the Audio Grabber power is plugged in and the antenna is attached.
2) Using the MAG-REMOTE press PLAY/PAUSE to enter IR programming mode.
a. The LED lights will scan then flash three times
3) The current transmitter MODE will be displayed for 2 seconds then the LEDs will go OFF, waiting for INPUT.
MYE 900
Cardio Theater LCS 900
Cardio Theater xTV 900
BroadcastVision Series 1 900
BroadcastVision Series 2 900
4) Press the numbered key that corresponds to the desired transmitter MODE, i.e. MYE 900 is MODE 1, the
MODE will be displayed for 1 second and the LED will start blinking. The transmitter is waiting for INPUT
(MANUAL OR SCAN).
Manual: Add in each channel as 01, 02, 03, etc. After each entry, led will flash and advance to next available
channel. When you are finished entering up to eight channels, press EQ to lock in channels.
Auto: Press NEXT to start the auto SEEK/SCAN process. The LEDs will illuminate from left to right then the
Audio Grabber will SCAN until the first good channel is found. The first LED will be flashing ON during this
time. Test and confirm audio is correct for the channel desired.
a. If audio is correct, press CHSET to lock in the frequency and move up to the next channel. Repeat.
b. If audio is incorrect, press NEXT again to move up to the next frequency scanned. If audio is correct,
press CHSET to lock in the frequency and move up to the next channel.
5) When you are finished entering in up to eight channels, press EQ to lock in all channels.
