MYDLINK DCS-8330LH, Быстрое руководство по установке, Страница: 11 / 24

9
DCS-8330LH
EN
G
LI
SH
What do I do if my device is not working properly?
Reset and reinstall your device. Use a paper clip to press the recessed
Reset
button and the LED will turn solid red.
During installation, ensure that:
• Your router is connected to the Internet and Wi-Fi is enabled.
• Your mobile device is connected to your router’s Wi-Fi and
Bluetooth is enabled.
• Your mydlink device is in range of your Wi-Fi network.
How can I use voice commands to control my device?
The device will work with both Amazon Alexa and the Google
Assistant. For setup instructions on these services, visit the following
websites:
Amazon Alexa: The Google Assistant:
dlink.com/en/alexa dlink.com/en/google-assistant
Why is my microSD card not working/not supported?
The microSD card must be formatted into the correct file system
(FAT32) before it can be used with this product. This can be done in
the mydlink app by selecting the
Format
function in the storage
menu under the device settings.
What is my username and password for setting up mydevice
with an ONVIF system?
To connect your device to an ONVIF system, key in “
admin
” as the
username and use the PIN code of your mydlink device as the
password. You can find the PIN code on your device’s label.
FAQ
?