mychway SR-MJ3201, Руководство пользователя, Страница: 15 / 26

4. The device should not be placed in wet environment or near water, nor should
they be directly exposed to sunlight.
5. Do not place the device near a strong heat source, because this may affect the life
and normal use of the device.
6. Before treatment, please remove all metal objects from the body first, so as to
avoid unexpected conditions and influence the curative effect.
7. Please restrain from using the device on eyes, thyroid, parathyroid, testicles,
abdomen of pregnant women, and pacemakers.
8. Patients who are suffering from illness should consult with a doctor and gain
permission from the doctor before using.
9. Please turn off the power switch of the device, and ensure that the total power
supply of the device is turned off before the staff leaves after daily use, so as to
ensure the safety of the electrical products.
10. Use device or train device operators in strict accordance with instructions in the
user manual.
11. Start from the lowest energy level and slowly add up.
12. When using this device, the operating parts must be kept moist and dry skin
should be avoided.
13. Clean the instrument with normal saline after operation to ensure its cleanliness
and hygiene and prolong its service life.
14. Inform the customer what’s expected during the microcurrent rollers and gloves
treatment to avoid startling the customer.
15. Microcurrent rollers and microcurrent gloves can be used alone or together for
better beauty result.
16. Use both hands and make sure the gloves are in full contact with the skin; start
from the lowest energy and slowly add up after adaptation; do not start with high
energy level to avoid discomfort.
17. Have the customer hold the passive electrode probe during the microcurrent
treatment.
4. Troubleshooting & Solutions
1. The instrument cannot be started, but the key light on the back of the instrument
does not work?
A. Make sure the power cord is connected to a valid power socket.
B. Whether the fuse tube on the back of the instrument is loose or burnt out.
2. No microcurrent energy output from the microcurrent roller?
A. Please check whether the plug connecting the instrument handle and the body is
tightly connected.
B. Please check if there’s any other substance on the face.
C. Please check if the customer is holding the passive electrode probe.
D. If the above methods cannot address the issue, please contact the instrument