rinse it with alcohol little by little.
(17) Clean the equipment with normal saline after operation so as to ensure its
cleanliness and hygiene, as well as extending its service life..
(18) Using the equipment and training the operators in strictly accordance with the
instructions specified in the manual.
5. Troubleshooting & Solutions
(1) Buttons in the back of the equipment are not working?
A. Make sure the power cord is plugged into a good power socket.
B. Check whether the fuse tube in the back is loose or burnt out.
(2) Diamond dermabrasion is without suction?
A. Please check whether the rubber hose connecting to diamond dermabrasion is
properly connected.
B. Please check whether the rubber ring check whether the rubber ring of the
diamond head twisted too tight that causes air leakage.
C. Please check whether the rotating knob for suction setting is set to zero.
(3) The equipment can be started but there is error message on the monitor?
A. Take out the plug in the back of the equipment, and wait for about 1 minute and
re-plug and restart it.
B. If the above-mentioned solutions are not working, please contact the equipment
dealer for assistance.
(4) The equipment can be started but the RF doesn’t have output?
A. Check whether the connecting wire for the handle is properly connected.
B. Check whether the start button on the interface is pressed or not.
C. Please confirm whether there is liquid medium on the face. For some handles
medium must be used to make it work better.
(5) The RF output is weakened?
A. Please check whether the equipment handle and the plug connecting to
equipment body are closely connected.
B. Please check whether there is non-conductive grease on the handle, which may
cause poor contact and weaken the output.
C. Please check whether the product used is the adaptive product specified by the
equipment.
6. FAQs
(1) Q: How long does it take to see the effect?
A: The skin becomes clean and bright obviously after one treatment, which will
become more obvious if you stick to it. This treatment can fix problems like
