7
8
2. How To Use
Blue LED is used for sterilization of the brushes.
Disinfection Light
Clean the brush first and then place it on the
stand to sterilize, best for 20-30 min.
Level 1 (blue) is applicable to sensitive skin
Level 2 (purple) can be applied to cleanse pores and acne
Level 3 (red) brings evident results of removing makeup residues
6. Press for 2 seconds to switch between cleansing and ultrasonic
nutrition lead in and out and there’s 3 levels of energy intensity;
7. The device is able to memorize the last setting;
8. Red light stays on during charging and turns blue when it’s fully charged;
9. Charging is needed when red light flashes;
10. Clean the device after treatment for next use.
11. Replace each brush every 3 months for better skin cleansing results.
1. First charging should be 10 hours or above.
2. Insert the brush into the concave slot.
3. Wet skin and the brush with water;
4. Lather up the cleanser and apply on the skin or brush; Press for 2
seconds to turn it on. Default mode is cleansing mode. Click on/off
button to switch energy level. Select the level that works for you and
start cleansing from forehead (40sec), to nose and chin (40sec), and
cheeks (each side for 20 sec). The device turns off automatically at 2
min. (Press the on/off button to turn off the device until it stops vibration);
5. 3 Levels of Cleaning
3. Technical Parameters
Model:
Rated Voltage/Power (Main Device):
Waterproof Level:
Charging Method:
Rated Voltage/Power (Base):
Charging Time:
NM-SN1S
3.7V=4W
IPX7
Wireless
5V=2.5W
Around 8 Hours
4. Packing List
1 x Main Device
1 x Power Cable
2 x Brush
1 x Charging Base
How To Use: Use with cleanser to clean facial skin.
Each session lasts for 1-2 min and use 3-5 times
per week. It applies to dry and combination skin.
Dry skin Brush
How To Use: Use with cleanser to clean facial skin.
Each session lasts for 1-2 min and use 5-7 times
per week. It applies to oily and combination skin.
Oily Skin Brush
Содержание NM-SN1S
Страница 1: ...USER MANUAL NM SN1S...