13.Adjust the vacuum suction pressure subjecting to the customers’ comfort level
accordingly.
14.Remind customer to adjust breathing when operating on philtrum with hydro spray
jet.
15.Clean the instrument with normal saline after operation to ensure its cleanliness
and hygiene to prolong its service life.
16.Make sure to distinguish inhale hole from exhale hole. DO NOT insert the hydro
spray jet into the inhale hole to avoid any possible damage to the machine.
17.Make sure to install rubber ring when operating microdermabrasion setting to
avoid no suction or weak suction.
18.Make sure to install filter cotton when operating microdermabrasion setting to
avoid filth being inhaled to the tube and damage the machine.
19.Avoid hand contact with the air outlet when operating cold and hot hammer
setting to avoid any discomfort caused by overheating.
20.Products used in the hydro spray jet needs to be of watery nature.
21.When operating the facial cleaning scrubber, the groove is outwards and the water
droplets will be seen splashing around in the form of water mist. Hold the cleaning
scrubber upside down and apply the flat surface to the skin for nutrients absorption
and skin lifting.
4. Troubleshooting & Solutions
1. The instrument can't start and the key lamp on the back of the instrument doesn't
work?
A. Ensure that the power cord is connected to a working power outlet.
B. Ensure the fuse tube on the back of the instrument is not loose or being burnt.
2. No spray coming from the hydro spray jet?
A. Please check whether the nozzle is blocked.
B. Please check whether the regulating part of the nozzle tail is tightened.
C. Please check whether the wrench of the spray gun is loose.
5. FAQs
1.Q: Will the skin become thinner and more sensitive after microdermabrasion
treatment?
A: No. During the process, microdermabrasion operation is just to remove the skin
aging cuticle. Our skin regenerates every 28 days, so it will only make the skin become
more smooth, fine and glowing. Sensitive symptoms will not appear.