The print tip heats the material to extrude a thin string of plastic which adheres to the print pad in layers . The print pad
lowers after each layer so that each one builds upon the last. This process continues through the final layer, until your
creation is complete .
CubeX 3d pRInTeR feaTuRes and pRopeRTIes
•
Plastic Jet Printing technology
•
Houses up to three print jets for multi-color and multi-material prints
•
Over material choices .
•
Choice between abs and PLa plastic, both recyclable
•
Prints objects up to 275 x 265 x 240 mm (10 .75”x10 .5”x9 .5”)
•
eZ load print cartridge
•
fully automated supports: peel off supports for abs and PLa; PLa supports can also be removed using the ultrasonic
support Removal Tank available at Cubify .com/cubex/store_parts
pRInT MaTeRIals
The CubeX can use two different types of print materials: PLA and ABS. Each material has unique benefits and you can
guide your selection based on the properties your part requires .
pla
This is a hard plastic that has a low environmental impact . It is derived from renewable, starch-based resources .
We recommend using PLa when printing extra-large parts on CubeX as it is a more stable print material
PLa is the optimal support material for industrial abs parts . PLa has the ability to dissolve away in caustic soda solutions
supported by an ultra-sonic tank . (see page 36 for more information)
abs
This is a well-known plastic known for its strength and industrial properties .
as a build material, abs is good for both small and large parts .
abs works as an excellent support material for extra-large PLa parts .
MaTeRIal ColoR ChoICes
CubeX 3d pRInTeR feaTuRes and benefITs
Glow-in-the-
dark neon
Green
* natural is only available in PLa plastic, not abs .
neon Orange
Glow-in-the-
dark neon
blue
Tan
White
Yellow
black
neon Green
silver
Green
Industrial Grey
blue
natural*
Teal
magenta
Purple
Red
brown
5