background image

Safety

We also recommend that great care be taken during use and cleaning. 

Read the cleaning and maintenance sections for this appliance carefully.

A  steam cleaner is not to be used.

The appliance is not intended to be operated by means of external timer or 

separated remote-control system.

The appliance is for domestic use only.

Warning: consult local regulations regarding fumes outlets.
Do not connect the hood to a fume, ventilation or hot air duct.
Confirm that room ventilation is appropriate with the local authorities.
Make sure the maximum air extraction flow rate for the appliances in the 

room does not exceed 4 Pa (0.04 mbar).
The room must have adequate ventilation if an extractor hood is used 

simultaneously with appliances that run on gas or other fuels.
The air must not be discharged into a flue that is used for exhausting fumes 

fromappliances burning gas or other fuels.
Regulations regarding air extraction must be complied with.

Warning: before connecting the hood: switch off the electricity supply and 

check that the supplied voltage and frequency coincide with that indicated 

on the appliance nameplate.

Warning: the hood may stop working during an electrostatic discharge (e.g. 

lightning). This involves no risk of damage. Switch off the electricity supply to 

the hood and reconnect after one minute.

To avoid the risk of fire, clean the metal filter regularly and closely watch and 

regulate pans containing hot oil.

Do not use the hood if it shows signs of damage or imperfection. Contact 

customer services.

Flambe cooking must not be carried out underneath this appliance.

When installing the appliance, make sure that the following distances 

between the top of cooker or hob and the lowest part of the cooker hood 

must be observed:
> Gas hoods: 750mm
> Electric hoods: 650mm

The Manufacturer declines all liability for personal or material damage as a 

result of misuse or incorrect installation of this appliance.

WARNING: 

There is a fire risk if cleaning is not carried out 

in accordance with the instructions

9

Getting

 started...

GB IE

Содержание ART11302





























Отзывы: