III. Keypad Functions
～
: Numeric keys
: Decimal point key.
: If there is a minor weight displayed, without anything
on the pan; hit the zero key to clear the display.
: Use this key to subtract the container’s weight.
Indicate that the current weight reading is net
weight
.
: This key is used for total count accumulation.
: Use this key to clear the total count accumulation.
: Use this key to eliminate the count check entries.
: Use this key for checking the number entry
confirmation.
:
Use this key to clear the readings entered.
: Used when manually keying in the unit weight.
: Sample Key . Used when keying in a sample amount.
IV. Operations
(I) Power on-
Remove all objects from the tray; push the switch to
“ ON
” to
turn the scale ON. The scale will self test and then go to
2
G=GROSS N=NET
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
HEAD DATA
UNIT CR
G/N
. W
. : +/-
(K) g CR LF
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
HELD DATA
UNIT
CR
U
.
W
. :
+ g
/
p
c s
CR LF
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
HELD DATA
UNIT
CR
T o t a l : + p c s CR LF
EXAMPLE
:
g
G.W. : + 100g
U.W. : + 0.2g/pcs
T0tal : + 500pcs
(XV) External Calibration
When the scale does not read accurately, you may
calibrate it with weight. Turn the scale on; press and hold
until the end of self-test.
It will show “
CAL
”. Press to show “ 0” ; place a weight
(2/3 of the Max. Capacity is recommended) on the tray; input
the value of the weight via numeric keys. The unit is kg. (Ex. The
Max . Capacity is 3kg ; the weight should be 2kg ; then enter 2).
after stable, press to confirm the entered . Now the
7
g
