8)
If the scale is excessively cold or hot, allow the scale to warm up to normal room temperature for at
least 1 hour prior to use.
9)
Do not operate a cell phone or cordless phone within 10 feet of the scale****
It may temporarily
cause the scale to malfunction
10)
If the scale ever reads "Lo" or weighs very slowly, please replace the batteries.
11)
In the unlikely event that the scale permanently "locks up" or shows ERROR, visit
http://www.myweigh.com/scales/palmscale-60-manual-and-calibration-guide for Advanced
Troubleshooting (the C300 Troubleshooting is the same as the Palmscale 5.0).
12)
If your scale should require recalibration, please refer to the calibration guide on the next page.
13)
This scale comes with changeable faceplate covers. To change faceplates, open the cover and pull to
separate it from the back of the scale. Press inwards on the prongs to release the entire tray from the
back of the scale. Insert the new cover (pushing in on the prongs as you insert it). There is also an
enclosed sheet with detailed instructions.
INSTRUCTION MANUAL
1.
Do not put anything on the scale tray before you turn it on.
2.
Turn the scale on by pressing After 2 seconds, the display will read "0.0 g".
3.
Always allow the scale to warm up for at least 30 seconds before weighing for accuracy & stability.
4.
Place the item to be weighed on the center of the silver platform and read the value on the display.
5. TARE Function:
If you need to weigh loose items or anything in a container or tray you should: 1) Turn
the scale On. 2) Place the empty container or tray on the platform. 3) Press the TARE button. 4) Place
the items to be weighed into the container / tray. 5) The exact weight of the items will show. (use your
tweezers to handle all gems)
6.
The scale has an Auto-Off feature that turns off the scale after lapses of non-activity. If the scale is in a
room with wind or air movement, it may sense the pressure of the air and not auto-off. In this case
simply press to turn the scale off manually.
7. UNIT Function:
This scale has the ability to weigh in grams or ounces. The selection is done by simply
pressing the UNIT key once the scale is on (Look for the g or oz on the top of the display).
8. BACKLIGHT
: To operate the Backlight simply press the
key and the backlight will automatically turn
on for ~6 seconds.
9. Temperature:
The recommended operating temperature is 64-82F (16-25C)Please only operate the
scale at recommended temperatures.
