My Water Filter ULTRAPURE, Инструкция по установке

Страница: 9 / 15

MY WATER FILTER INSTALLATION INSTRUCTION
3. Unpack the Easy Fit Laundry Connector 3/4” Male x 3/4” Female x 1/4”
Side Female Connection and ball valve.
NOTE
: The benchtop water filter units do not come with these laundry
adaptor connectors. This must be purchased separately from the
website of My Water Filter if required. Please call our customer service
hotline for assistance.
4. Insert the rubber washer inside the 3/4” Easy Fit Laundry Connector.
Wrap thread tape around the 3/4” male threaded end of the laundry cold
water tap. Wrap the 3/4” male threaded end of the Easy-Fit Laundry
Connector with thread tape. Screw the 3/4” female end of the Easy-Fit
Laundry Connector onto the laundry cold water tap thread.
Hand tighten then tighten firmly using a tool or spanner. Avoid over-
tightening as this might squash the rubber washer and cause water
flow restriction.
Make sure the side threaded hole on the Easy-Fit Laundry Connector
faces outward as this is where the on/off ball valve will be connected.
Screw the washing machine hose back onto the 3/4” male threaded
end of the Easy-Fit Laundry Connector, then tighten firmly by hand.