connector of the hose. (See diagram below)
6. Place the water filter into position (Ensure you have a minimum of 30mm of space
under the water filter housing so you are able to remove the housings to replace the
cartridges when required) Drill 2 x holes in accordance with the mounting holes of the
under sink bracket. Screw the mounting screws into the holes, then mount the under
sink water filter onto the screws, tighten as required.
7. Push the water hose into the push-in connector of the t-piece, then cut the water
hose to length & insert into the PLV, then into the inlet side of the water filter. Use the
remaining hose to push into the outflowing side of the water filter ready to connect onto
the faucet.
Содержание ULTRAPURE Aragon
Страница 2: ...Parts ...
Страница 3: ...Faucet Parts ...
Страница 5: ...Installation Diagram ...
Страница 16: ...For Customer Service Call us at 1800 769 300 My Water Filter Pty Ltd ...