To turn on your unit, slide the Power Switch up to the
desired speed. Low Speed is recommended for fine hair
and High Speed for coarse hair.
0 = Power Off; 1 = Low Speed; 2 = High Speed.
Hold the unit in the palm of your hand at a 90° angle
with the discs facing upright and the unit facing you.
To minimize discomfort, hold the skin taut surrounding
the area you are removing hair from. Gently glide the
Trio3in1
over the area using short, quick, brush-like or
sweeping strokes in the direction of hair growth.
Note: for your protection, the unit may slow down,
or stop operating completely if it is pressed too hard
against the skin.
For the Face
The
Trio3in1
is only intended to remove individual hairs
from the upper lip and chin. Hold the area taut and
use a short brushing motion. Repeat within each area
until all unwanted hair is removed. The Trio3in1 is not
intended to be used like an electric shaver or to remove
hair from the entire face.
About
Epilation
