Adjusting the handle height
The stroller has a height-adjustable handle. To adjust, press
the round push buttons located on both sides of the handle
and set it to the desired height (Fig. 11, 12).
Folding the stroller
To fold the stroller, press the round knobs on the height
adjusters on the handle (Fig. 13) and lower it to maximum
so that it makes contact with the stroller’s frame (Fig. 14).
Then pull the belt above the basket upwards slightly, until
the handle folds down (Fig. 15, 16) and then lift the stroller
(Fig. 17).
Attention! Make sure that the underside of the basket
is above the children’s plastic footrest before folding
the stroller frame completely.
Assembly and disassembly of the baby tub
To attach the baby tub, press it on to the stroller frame so
that the click systems on the sides of the baby tub engage
with the frame (Fig. 18, 19). The blocking takes place auto-
matically. To remove the baby tub, press the snaps on the
click system on both sides of the baby tub and pull the baby
tub up.
Attention! Make sure that the baby tub is properly se-
cured before use.
Peep window of the baby tub
The peep window can be used by opening the zip at the
headrest of the baby tub. Your baby can look through it
while lying on its belly when it is old enough (Fig. 20).
Louvers on the baby tub
The louvers on the cover of the baby tub can come into use
by opening the zip and extending the cover (Fig. 20).
11
13
15
17
19
12
14
16
18
20
Manual VITA Hope
EN