MY
FireplaceBlower
NOTE: Diagrams and Illustrations NOT to Scale
Page 4 of 4
Installations in Canada must conform to the current CAN/CGAB-419.1 and .2 Gas Installation Code and local regula-
tions. When installing the blower fan kit, it must be electrically grounded in accordance with CSA C22.1 Canadian
Electrical Code Part 1 and/or Local Codes.
Installations in the USA must conform to local codes, or in absence of local codes or the National Fuel Gas Code,
ANSI Z223.1-1988. When installing the blower fan kit, it must be grounded in accordance with local codes, or in
absence of local codes, with the National Electrical Code, ANSI/NFPA 70-1987.
My Fireplace Blower LLC produces and sells aftermarket fireplace blower kits; which require consultation
of an Owner’s Installation Manual from the Manufacturer of a particular fireplace model number for in
-
stallation. During Installation of a fireplace blower kit or replacement blower, refer to the Owner’s Instal
-
lation Manual for your particular fireplace model to obtain supplemental information. My Fireplace Blower
LLC is not responsible for any damage incurred during installation or resulting from installation of a fire
-
place blower kit, which was directed and/or conducted from the information within this document.
Figure: 7
Figure: 8
Step 9:
Insert 3-Prong Plug into Junction Box/power supply.
(Figures: 9)
•Wiring Diagram for this Blower Kit is illustrated in
Figure: 6.
Figure: 9
Finishing Steps:
Replace gas valve, logs and glass if removed earlier.
Refer to Owner’s Installation Manual.
If appliance is connected to a gas supply, turn it
back on.
If appliance is connected to 120 Volt Power, turn it
back on.
Installer is responsible to check local codes
and read all instructions prior to installation.
Layout designed in U.S.A. © 2019
My Fireplace Blower
Burlington, Wisconsin
1-800-466-4045
MyFireplaceBlower.com
KT1103
blower wiring
Junction
Box
Power Cord
Pre-Installed
Bracket
(Direct-Vent
Only)
Control
Knob
Control
Shaft
Lock Nut
Speed Control
Knob
Speed Control
Stem
Lock Nut
Front Panel
of Fireplace
locate velcro
Variable Speed Control
