page 4
Opening and closing the baby walker
Attaching the walker’s front wheels
B
C
A
1. To open, or raise the height, ensure
that block (A), as shown in step 2 is in the
unlocked position (B), hold either side
of the upper part of the walker and pull
upwards until you hear a click. When at
the desired height turn the lock to the
locked position (C).
2. To close or lower the height, first ensure
block (A) is unlocked (B) then pull block
(A) forward and lower the walker. When
at the desired height turn the lock to the
locked position (C).
WARNING! NEVER adjust the height when your child is in the walker. DO NOT place your
child in until you have adjusted the height and locked the height adjust lock.
3. With the baby walker upside down
and fully folded down, insert the two front
wheels into each round hole on either
corner at the front of the walker.
Tip:
Use the provided wheel pusher tool
to press the wheels in (tap the back of
the wheel pusher lightly with a hammer if
required)
